Internal measurements:

3/4" in diameter, 1" deep

Don't tell anybody it's motorcycle related<g>.
--
Old Crow
'82 FLTC(P)'Pearl'
'87 FLTC '?'
'61 F-100
BS#132, TOMKAT, SENS, SLOB#13
** Posted from http://www.teranews.com **

Old Crow wrote:
> Internal measurements:
>
> 3/4" in diameter, 1" deep
>
> Don't tell anybody it's motorcycle related<g>.

Sounds like the outside oughta be around an inchannaquatta squrred . I
think I got a chunk that big in diameter . How far from the end is the
(bolt) groove ?
I won't .
--
Snag
'90 Ultra "Strider"
'39 WLDD "Popcycle"
Buncha cars and a truck

On Mon, 18 Aug 2008 17:40:04 -0500, "Terry Coombs"
<snagone@bellsouth.net> wrote:

>Old Crow wrote:
>> Internal measurements:
>>
>> 3/4" in diameter, 1" deep
>>
>> Don't tell anybody it's motorcycle related<g>.
>
> Sounds like the outside oughta be around an inchannaquatta squrred . I
>think I got a chunk that big in diameter . How far from the end is the
>(bolt) groove ?
>I won't .

Without looking, I'd say half way down.
Got the top end on, eng in bike, triple trees on and forks
disassembled for polishing and new seals.
After the forks is the wiring harness I think. Then I got to start
painting again. I ordered my own air brush as opposed to using the
boss's, should be here this week.
I'm taking next Sat off to ride. Prolly work on it Sunday.
--
Old Crow
'82 FLTC(P)'Pearl'
'87 FLTC '?'
'61 F-100
BS#132, TOMKAT, SENS, SLOB#13
** Posted from http://www.teranews.com **

On Mon, 18 Aug 2008 17:40:04 -0500, "Terry Coombs"
<snagone@bellsouth.net> wrote:

>Old Crow wrote:
>> Internal measurements:
>>
>> 3/4" in diameter, 1" deep
>>
>> Don't tell anybody it's motorcycle related<g>.
>
> Sounds like the outside oughta be around an inchannaquatta squrred . I
>think I got a chunk that big in diameter . How far from the end is the
>(bolt) groove ?
>I won't .

Disregard first reply. Groove starts 1/4" from end of stub and is
1/4" wide. 'Tis a dark walk out to the shop at this time of day<g>.
--
Old Crow
'82 FLTC(P)'Pearl'
'87 FLTC '?'
'61 F-100
BS#132, TOMKAT, SENS, SLOB#13
** Posted from http://www.teranews.com **

Old Crow wrote:
> On Mon, 18 Aug 2008 17:40:04 -0500, "Terry Coombs"
> <snagone@bellsouth.net> wrote:
>
>> Old Crow wrote:
>>> Internal measurements:
>>>
>>> 3/4" in diameter, 1" deep
>>>
>>> Don't tell anybody it's motorcycle related<g>.
>>
>> Sounds like the outside oughta be around an inchannaquatta squrred
>> . I think I got a chunk that big in diameter . How far from the end
>> is the (bolt) groove ?
>> I won't .
>
> Disregard first reply. Groove starts 1/4" from end of stub and is
> 1/4" wide. 'Tis a dark walk out to the shop at this time of day<g>.

Turn , Turn , Turn .
--
Snag
'90 Ultra "Strider"
'39 WLDD "Popcycle"
Buncha cars and a truck

On Tue, 19 Aug 2008 20:54:46 -0500, "Terry Coombs"
<snagone@bellsouth.net> wrote:

>Old Crow wrote:
>> On Mon, 18 Aug 2008 17:40:04 -0500, "Terry Coombs"
>> <snagone@bellsouth.net> wrote:
>>
>>> Old Crow wrote:
>>>> Internal measurements:
>>>>
>>>> 3/4" in diameter, 1" deep
>>>>
>>>> Don't tell anybody it's motorcycle related<g>.
>>>
>>> Sounds like the outside oughta be around an inchannaquatta squrred
>>> . I think I got a chunk that big in diameter . How far from the end
>>> is the (bolt) groove ?
>>> I won't .
>>
>> Disregard first reply. Groove starts 1/4" from end of stub and is
>> 1/4" wide. 'Tis a dark walk out to the shop at this time of day<g>.
>
> Turn , Turn , Turn .

I love this bar.
--
Old Crow
'82 FLTC(P)'Pearl'
'87 FLTC 'Big Brown'
'61 F-100
BS#132, TOMKAT, SENS, SLOB#13
** Posted from http://www.teranews.com **

Old Crow wrote:
> On Tue, 19 Aug 2008 20:54:46 -0500, "Terry Coombs"
> <snagone@bellsouth.net> wrote:
>
>> Old Crow wrote:
>>> On Mon, 18 Aug 2008 17:40:04 -0500, "Terry Coombs"
>>> <snagone@bellsouth.net> wrote:
>>>
>>>> Old Crow wrote:
>>>>> Internal measurements:
>>>>>
>>>>> 3/4" in diameter, 1" deep
>>>>>
>>>>> Don't tell anybody it's motorcycle related<g>.
>>>>
>>>> Sounds like the outside oughta be around an inchannaquatta squrred
>>>> . I think I got a chunk that big in diameter . How far from the end
>>>> is the (bolt) groove ?
>>>> I won't .
>>>
>>> Disregard first reply. Groove starts 1/4" from end of stub and is
>>> 1/4" wide. 'Tis a dark walk out to the shop at this time of day<g>.
>>
>> Turn , Turn , Turn .
>
> I love this bar.

You owe me a bottle of Dickel . And you need two 5/16-18 x 1/2" setscrews
and some loctite .

--
Snag
'90 Ultra "Strider"
'39 WLDD "Popcycle"
Buncha cars and a truck

On Wed, 20 Aug 2008 20:57:55 -0500, "Terry Coombs"
<snagone@bellsouth.net> wrote:

>Old Crow wrote:
>> On Tue, 19 Aug 2008 20:54:46 -0500, "Terry Coombs"
>> <snagone@bellsouth.net> wrote:
>>
>>> Old Crow wrote:
>>>> On Mon, 18 Aug 2008 17:40:04 -0500, "Terry Coombs"
>>>> <snagone@bellsouth.net> wrote:
>>>>
>>>>> Old Crow wrote:
>>>>>> Internal measurements:
>>>>>>
>>>>>> 3/4" in diameter, 1" deep
>>>>>>
>>>>>> Don't tell anybody it's motorcycle related<g>.
>>>>>
>>>>> Sounds like the outside oughta be around an inchannaquatta squrred
>>>>> . I think I got a chunk that big in diameter . How far from the end
>>>>> is the (bolt) groove ?
>>>>> I won't .
>>>>
>>>> Disregard first reply. Groove starts 1/4" from end of stub and is
>>>> 1/4" wide. 'Tis a dark walk out to the shop at this time of day<g>.
>>>
>>> Turn , Turn , Turn .
>>
>> I love this bar.
>
> You owe me a bottle of Dickel . And you need two 5/16-18 x 1/2" setscrews
>and some loctite .

And I'm takin' a half day off tomorrow<g>.
--
Old Crow
'82 FLTC(P)'Pearl'
'87 FLTC 'Big Brown'
'61 F-100
BS#132, TOMKAT, SENS, SLOB#13
** Posted from http://www.teranews.com **