Searching for sources for odd electrical connectors used
on late '80s BMW airheads and probably other German
cars. Any good online sites and catalogs much appreciated.

My most recent problem is a three pin connector between
the Hall ignition cannister and the ICU. Mating rectangular
connector housings with three flat pins and an external
spring clip that drops into a groove to hold the two housings
together.

Thanks for any leads.

Rob Kleinschmidt

Rob Kleinschmidt wrote:
> Searching for sources for odd electrical connectors used
> on late '80s BMW airheads and probably other German
> cars. Any good online sites and catalogs much appreciated.
>
> My most recent problem is a three pin connector between
> the Hall ignition cannister and the ICU. Mating rectangular
> connector housings with three flat pins and an external
> spring clip that drops into a groove to hold the two housings
> together.

You might try de.rec.motorrad.

Or ask yourself, how important is it to have the OEM connector?
I've been known to clip off the original connectors and replace
with a Molex type, or whatever else is handy and suitable.

--
'07 FJR13AW '99 EX250-F13
OMF #7